ANALISIS PENYEBAB PUTUSNYA WIRE HOISTING CRANE PADA KEGIATAN BONGKAR MUAT di MV AGP KARTINI III
Abstract
Wire hoisting crane is an essential component in ship cargo handling operations, functioning as a load lifting device. Damage to the wire hoisting crane, particularly wire failure, can disrupt cargo operations and increase the risk of occupational accidents. This study aims to analyze the causes of wire hoisting crane failure during cargo handling operations on MV AGP KARTINI III and to examine the role of routine maintenance and inspection in its prevention. The research method employed is descriptive qualitative, with data collected through field observations, interviews with ship crews, and documentation studies. The results indicate that wire hoisting crane failure is caused by physical deterioration of the wire due to wear and corrosion, crane operation with loads approaching or exceeding the Safety Working Load (SWL), and inadequately implemented maintenance and inspection practices. Therefore, planned maintenance, regular inspections, and proper crane operation in accordance with safety procedures are necessary to prevent similar incidents.
References
Aurio Valencia Dega. (2024). Keselamatan dan Efektivitas Wire Hoisting Crane pada Kegiatan Bongkar Muat.
Fauzi, A. (2019). Penanganan Keru-sakan Wire Rope pada Crane Kapal dalam Kegiatan Bongkar Muat.
House, D. J. (2024). Cargo Work for Maritime Operations. London: Routledge.
International Maritime Organization. (2007).MSC.1/Circ.1206/Rev.1: Measures to Prevent Accidents with Lifeboats. London: IMO.
International Maritime Organization. (2017). International Conven-tion on Standards of Training, Certification and Watchkeeping for Seafarers (STCW), 1978, as Amended, Section A-VI/1: Basic Safety Training and Sec-tion A-VI/2: Proficiency in Sur-vival Craft and Rescue Boats. London: IMO.
Romdona, S., Senja Junista, S., & Gunawan, A. (2024). Teknik Pengumpulan Data: Observasi, Wawancara dan Kuesioner. JISOSEPOL, 3(1), 39–47.
Rudiana, Wulandari, R., & Junita, R. (2020). Optimalisasi Perawatan dan Pengoperasian Alat Keselamatan Sekoci sebagai Penunjang Keselamatan di MV Kartini Baruna. Meteor STIP Marunda, 13(1), 32–38.
Santoso, B. (2020). Penerapan Prosedur Keselamatan Kerja pada Pengoperasian Crane di Kapal.
Septian Dheo. (2018). Optimalisasi Perawatan Sekoci Penolong untuk Mendukung Keselamatan Jiwa ABK dan Pelayaran di MV Tanto Bagus.
Sutrisno. (2018). Perawatan dan In-speksi Wire Rope pada Crane Kapal untuk Mencegah Keru-sakan Saat Kegiatan Bongkar Muat.
Waruwu, M. (2024). Pendekatan Penelitian Kualitatif: Konsep, Prosedur, Kelebihan dan Peran di Bidang Pendidikan. Jurnal Pendidikan dan Evaluasi Pen-didikan, 5, 198–211.
